Sign In | Join Free | My ismap.com
China Shanghai JinZhu Industrial Co., Ltd logo
Shanghai JinZhu Industrial Co., Ltd
Pu Foam sealant manufacturer
Active Member

1 Years

Home > Pu Foam >

Pu Foam Sealant Factory, PU FOAM

Product Categories
Shanghai JinZhu Industrial Co., Ltd

Pu Foam Sealant Factory, PU FOAM

  • 1
  • 2

Brand Name : JZS

Place of Origin : China

MOQ : 10000

Price : 0.6$~1.5$

Payment Terms : T/T

Supply Ability : 100000000

Delivery Time : 7~15

Packaging Details : 750ml

feed tank : +10℃-+30℃

Environment : +5℃-+30℃

foam multiples : 78times.

Dry Time : 10 to14 minutes

Cutting Time : 30-40 minutes

Contact Now

APPLICATION AREA:

gate,window frame packing and installment;crack and lack hole packing;dustproof,against harmful insect,against air infiltration's seal;air conditioning,platoon wind the fan's crack sealing;pipeline and sewer's sea;heat insulation,the sound-insulated;electric appliance switch-box's installment locates and insulates;the bathtub electric wire exports the crack packing;each kind of non-sign brittle goods quakeproof packing;roof the crack fill;waterpoofing and heat preservation;stops up each kind of harmful insect saliva to nip function;to stop up against mouse access duct,hole and so on


CHARACTERISTIC OF PRODUCTS

feed tank:+10℃-+30℃

Environment:+5℃-+30℃foam multiples:78times.

the best construction temperature:18℃to +25℃.

Curing temperature range:-40℃to +90℃.
Dry Time :10 to14 minutes
Cutting Time: 30-40 minutes
This test data obtained under laboratory conditions 23℃.50%RH

STORAGE

Please put this product without Kaifeng preserved in the +10℃

to + 30℃dry places. Prohibited near open flame or and

inflammable and explosive materials contact.


PRODUCTS APPLICATION

1.pre-construction,construction of the surface to remove floating dust,oil.andspray a little water in the surface construction.

2.cans will be expected to shake up and down several times.Material can be fixed on the gun upside down and rotate the connector.

3.material can be used upside down.Spray foam from the buttom up,in general,only 70-90% filled joints(slightly inflated the bubble will install)

4.Ten minutes after the start curing the suface,wait about 40minutes to remove excess foam.

5.This product in not UV,it is recommended in the curing of the foam surface coating with other materials,such as:cement,mortal,paint,etc.(24 hours to paint the construction).


Safety recommendations:

The product after curing, no harm to the human body. Construction please wear protective gloves, clothing,masks and goggles. The construction site must be ventilated. This product may cause eye, respiratory system,skin discomfort. Accidentally inhalation or skin contact may cause irritation symptoms. Prohibit near open flame or contact with flammable and explosive articles, no smoking. Do not inhale vapors. If swallowed immediately sent to hospital. The inadvertent inhalation after stimulation symptoms should be immediately transferred to the fresh air and see the doctor. Avoid direct sunlight, in a cool and dry place, and the temperature does not exceed 50℃. After the use of prohibited burning or piercing empty cans. Please put paint on the place where children can not reach


Buy cheap Pu Foam Sealant Factory, PU FOAM product

Pu Foam Sealant Factory, PU FOAM Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Shanghai JinZhu Industrial Co., Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0